Tools, lamps & Keys– Page 136

LED wireless charger that supports 10W charging. The phone is thus charged 2x faster than most wireless chargers allow. The high-speed wireless charger is compatible with phones that support Qi (wireless) charging. The wireless charger can be printed all over the front, which is backlit when used.

Specification:

Input: 5V/2A

Charging power: 10W

Practical key cable with a length of 11 cm, suitable for charging and data transfer.
Made of durable ABS and TPE material, making it lightweight, compact and always at hand.
Available in a wide range of colors for easy coordination with corporate identity.
Product suitable for logo placement.

Specifications:

USB input, USB-C output

Charging and data transfer

Output: 5 V / 2 A max

LED table lamp with magnetic switch. This lamp consists of a cylindrical base from which an oval shield emerges. The inside of the shade is equipped with an LED strip, which emits its light inwards over the entire surface. It surrounds two magnetic balls, which are attached at the top and bottom with a fine thread. The light can thus be controlled quickly and easily thanks to the practical on / off system, which takes place through a magnetic contact. Great as a night light, reading lamp or office. Available in 2 dimensions: 246 x 150 x 55 mm or 407 x 220 x 70 mm.

Specification:

Dimensions: 246 x 150 x 55 mm or 407 x 220 x 70 mm

Material: ABS or wood

Colors smaller size: light gray, dark gray

Colors larger size: white, black or red

Input voltage: 1A 5V

Power consumption: 3W

Compact and powerful LED flashlight with zoom function and LED display. This portable flashlight is an ideal helper for outdoor activities, working in dark conditions and emergency situations. Thanks to the zoom option, the width of the light cone can be easily adjusted as needed. The LED display allows you to monitor the remaining energy in real time, so you always have an overview of the battery status. The durable construction made of hard ABS material protects the lamp from wear and tear and falls. The built-in rechargeable battery with a capacity of 1200 mAh provides a long battery life and can be quickly charged via the USB-C port. The super bright white laser LED offers an afterglow of up to 500m and three light modes: high light, low light and flashing.

Product suitable for logo placement.

Key Features:

Zoomable lens for adjusting the reflector

LED display showing remaining power

Durable ABS construction against drops and wear

Fast charging via USB-C

Super bright white LED with a range of up to 500 m

Three light modes: strong, low, flashing

TECHNICAL SPECIFICATIONS:

LED type: White laser LED

Afterglow: Up to 500 m

Battery: 1x 18650 Li-ion, 1200 mAh

Charging: USB-C, fast charging

Material: ABS (drop resistant)

Light Modes: Strong / Low / Flashing

PACKAGE CONTENTS:

1x LED flashlight

1× 18650 Li-ion battery (1200 mAh)

1× USB-C charging cable

1× User manual

LED gift set of a 3-in-1 wireless charger and charging cable with a colorful 3D backlit logo.

The set includes a stylish wireless charger that is suitable for charging your device in any situation. The wireless charger allows you to charge devices that support Qi wireless technology.

The charger is complemented by a universal charging cable with three connectors: Micro USB, USB-C and Lightning for iPhone. The advantage of this set is the possibility of full-color printing and a 3D illuminated effect, which is suitable as an advertising product. The entire set is packed in a gift box with foam padding.

Wireless charger specifications:

input: 5V-2A; 9V-1.67A (max.)

output: 9V-1A

power: 10W

efficiency: ≤80%

transmission distance: ≤8mm

product size: 111x68x8mm

material: PC, ABS

3in1 charging cable specifications:

connector: USB to Lightning/Micro USB/Type-C

current: 2A (max.)

cable length: 120 mm

material: ABS, TPE

Packaging:

fast LED wireless charger

3in1 charging cable

user manual

black gift box

The 2in1 rechargeable flashlight allows you to discover the beauty of nightlife in nature. This flashlight has 3 lighting modes, water resistance IP56 and a built-in lighter. When fully charged, the lighter can light about 3 packs of cigarettes. It can be used mainly during camping, hiking or as a car emergency light. Ideal as a promotional item.

Specification:

water resistance: IP56

battery: 360mAh

charging time: 2 hours

output: 5V 1A

The FullHD camera is the best tool for automotive fans for demonstration traffic accidents. A G-sensor camera that will help you in case of an accident by locking the recorded scene and then protecting the file from deletion.

Specifications:

MicroSD card slot up to 32GB
140 ° angle of view
G-sensor (In case of an accident, it automatically locks the currently recorded scene, and the file is thus protected against deletion or transcription by another recording loop.)
Display: 2.7″
Video resolution: The maximum resolution is HD 1080p
Power: built-in Li-ion battery
Built-in stereo microphone
Features: anti-shake, motion detection, ignition on, continuous recording, cycle recording

Dimensions: 87 * 46 * 35 mm

Universal USB cable with six connectors: USB-A + USB-C, Micro – USB, Lightning and USB-C. It can be easily attached to a key ring. Connectors contain magnets to secure the cable to the key ring. Available in multiple colors.

The USB adapter is suitable for any standard types of lighter in a car. Recharges two devices at the same time and is also suitable for promotional printing.

input: 12-24 V

output: 5V 1.5A or 5V 2.1A (total 3.6A)

The product is perfect for promotional prints.

This practical car holder makes it easier for your electronic device to operate while driving. Its installation is easy – just snap it into the ventilation grille and you can start using it right away. Also included is a metal token that you attach to a smart phone and you are winning. If you are using the phone cover, simply attach the token to the packaging or just insert it between the back of the phone and the cover.

This practical magnetic holder for your phone makes it easier for your device to operate while driving. Its installation is easy – just attach it to your dashboard or windscreen. Also included are two different sized magnetic chips to quickly and easily attach the phone to the holder. Thanks to the really cool design, it fits perfectly into the interior of your vehicle. Of course, the joint is adjustable to any angle.

The USB adapter is suitable for any standard lighter type in a car. Recharges two devices at the same time and is also suitable for promotional printing. The adapter has a stylish silver ring.

input: 12-24 V

output: 5V 2.1A or 5V 1A (max total 2.1A)

The product is perfect for promotional prints.